Betonrossi Concretes
Special concretes
Over the years, the company has constantly worked to broaden the range of products it has to offer, creating new concretes.
This is the result of the need to provide the best possible answer to clients’ specific needs, supporting them at all stages in identifying potential problems arising from the use of concrete, and providing solutions.
For each problem, there is a solution: structural, durable, highly workable and with high insulating properties. Concretes for restoration work, for tunnels, for prefabricated elements, pigmented or rapid curing.
Limit values for classes of exposure to chemical attack in natural soil and in groundwater
Chemical characteristic |
Reference test method |
XA1 | XA2 | XA3 |
SO2-4 mg/l | EN 196-2 | ≥200 and ≤600 | >600 and ≤3000 |
>3000 and ≤6000 |
PH | ISO 4316 | ISO 4316 | <5.5 and ≥4.5 | <4.5 and ≥4.0 |
CO2 mg/l agg. | prEN 13577:1999 | ≥15 and ≥40 | >40 and ≤100 | >100 up to saturation |
NH4+ mg/l | ISO 7150-1/2 | ≥15 and ≤30 | >30 and ≤60 | >60 and ≤100 |
Mg2+ mg/l | ISO 7980 | ≥300 and ≤1000 | >1000 and ≤3000 |
>3000 up to saturation |
Chemical characteristic |
Reference test method |
XA1 | XA2 | XA3 |
SO2-4 mg/Kg* tot. | EN 196-2 ** | ≥2000 and ≤300 | >3000*** and ≤12000 | >12000 and ≤24000 |
Acidity ml/Kg | DIN 4030-2 | <200 Baumann Gully | Not found in practice | Not found in practice |
*Clayey soils with an impermeability less than 10 -5 m/s can be classified in a lower class.
** The test method prescribes the extraction of SO2-4 by means of hydrochloric acid. Alternatively, it can be extracted using water if this practice is adopted where the concrete is used.
*** The limit of 3000 mg/kg can be reduced to 2000 mg/kg if there is a risk of an accumulation of sulphate ions in the concrete due to wetting/drying cycles or capillary suction.
Betonrossi Products
Product Safety Data Sheet
The Safety Data Sheets for products supplied by Betonrossi indicate the substances contained, the method of use and the emergency measures to be employed for the correct use of the products described.
In this section you can download the attached file in pdf format. It contains all the information about the safety data sheets of the available concretes.
Betonrossi products
Our wide range of products
Betonross Concretes
Multibeton
Durable concrete with guaranteed performance for structural applications. Betonrossi’s Multibeton® Performance concretes comply with the provisions of UNI EN 206:2016, UNI 11104 and the current “Technical Standards for Construction” of the Ministry of Infrastructure and Transport. Their characteristics can be varied across a wide range depending on the mechanical strength required, the environment and the complexity of the processing or the pouring.
Discover »
Betonrossi Concretes
Multibeton SCC
Multibeton SCC is Betonrossi’s self-compacting concrete, a feature of which is its high flow rate during pouring. This makes it possible to fill complex formworks containing a high density of reinforcement, even when the pouring is at a distance from the discharge point.
Discover »
Betonrossi Concretes
Special Calcestruzzi
Over the years Betonrossi has focused on diversifying its product range, in order to be able to offer a more complete and comprehensive response to the specific needs of the market and of its customers, supporting them every day in researching and identifying the most suitable solutions.
Discover »
Betonrossi Concretes
Betonpav
Over the years Betonrossi has focused on diversifying its product range, in order to be able to offer a more complete and comprehensive response to the specific needs of the market and of its customers, supporting them every day in researching and identifying the most suitable solutions.
Discover »
BETONROSSI SPA
Catalogs and
Technical Data Sheets
Download the product catalog
Browse the product catalog